Focus on industrial videoscope
hotline: +86 755 84863736
leo@hdborescope.com
FOLLOW US
Home / News / Industrial Endoscopes /

What are the factors that affect the measurement accuracy of industrial endoscope?

What are the factors that affect the measurement accuracy of industrial endoscope?

Issue Time:2021-05-12
Through the network video imaging technology, the industrial endoscope is extended into the object, and then we take a picture of a lens to detect whether there is a problem with the object. But there are some important factors that affect the measurement accuracy of enterprise equipment. What are the specific factors that affect the measurement accuracy of industrial endoscope?

1. The radius of curvature of the workpiece. If the pipe diameter of the workpiece is too small, it cannot be measured. We can reduce the curvature of the workpiece and help the equipment measure better. We can choose a special small diameter probe to accurately measure the curved surface material of the pipeline and enter into the equipment, so as to improve the detection accuracy.

2. The rough appearance of the work piece. The surface roughness of the work piece will affect the observation efficiency of the equipment, the reflected echo of the equipment is low, and the roughness of the object will cause the equipment to be unable to absorb the echo signal. Researchers can reduce the roughness of product appearance by grinding, grinding and scratching.

Three. Symmetry of casting structure. The structure of the casting will also affect the working accuracy of the industrial endoscope. If the casting structure is asymmetric or the grain is coarse, it is easy to affect the normal detection of the equipment. If there is a lot of corrosion on the surface of the measured object, the measurement effect will be seriously affected. If there is sediment in the measured object such as pipeline, it will also affect the detection effect of the equipment